# Conversation Translation

The Conversation Translation feature allows operators to view a MyLINK Connect conversation in their selected language, regardless of the language used by the end user.

{% hint style="warning" %}
This feature is available only with a specific license and a sufficient number of tokens.
{% endhint %}

### Enabling the feature <a href="#enabling-the-feature" id="enabling-the-feature"></a>

To enable Conversation Translation:

1. Open your Profile Settings.
2. Set your preferred Conversation Operator Language.
3. Enable the Automatic Translation toggle.
4. Click Update to save your changes.

Refer to the following image for visual guidance:

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2FXYDxcxROG3PkyveVFvAr%2Fimage.png?alt=media&#x26;token=6fb9e0b1-b2d3-4d55-b69d-451fbfe6895a" alt="" width="563"><figcaption></figcaption></figure>

### Translation Errors <a href="#translation-errors" id="translation-errors"></a>

If the user has no remaining AI tokens, an error banner will be displayed within the conversation, and no translation will occur:

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2F4xDn9Ll981KcSzJPvfhB%2Fimage.png?alt=media&#x26;token=7b2c748d-309c-44b3-b979-e71330ca10d5" alt="" width="563"><figcaption></figcaption></figure>

### Using Translation in Conversations <a href="#using-translation-in-conversations" id="using-translation-in-conversations"></a>

Once enabled, navigate to the Conversations section and open a conversation detail. MyLINK Connect will automatically:

* Detect the user’s language.
* Translate the entire conversation into the selected Operator Language.

Initially, a message will appear indicating that the system is translating the conversation, as shown below:

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2FdT1PNvXFIOz6pKTWDv72%2Fimage.png?alt=media&#x26;token=44415318-df57-4e1a-b150-1e749c271d80" alt="" width="563"><figcaption></figcaption></figure>

{% hint style="danger" %}
If If the operator and user share the same language, translation will be temporarily disabled. It will only be re-enabled if either language is changed via the **Profile Menu** or **Translation Menu**.
{% endhint %}

Once the translation is complete, the system will:

* Display the detected Operator Language and User Language.
* Show all messages translated into the Operator Language.

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2FMGpE21IcRdxE492OZctL%2Fimage.png?alt=media&#x26;token=d4b117a3-e840-4308-9b57-272dcb911039" alt="" width="563"><figcaption></figcaption></figure>

## Managing Translation Settings

To disable translation for a specific conversation or manually change the user's language:

1. Click the Translation Menu.
2. Select Conversation User Language to open the language selection dialog:

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2FImqHM027KAfIHlOM8AWp%2Fimage.png?alt=media&#x26;token=ef25d1d3-78d7-4cff-90c6-1381d15190ed" alt="" width="563"><figcaption></figcaption></figure>

<figure><img src="https://3974284760-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FtZEstFBYh3uMutlup6ku%2Fuploads%2FFbIN5k0RgVYZnkk2hPOF%2Fimage.png?alt=media&#x26;token=2d5572d0-0791-49ff-8da4-976f6d12ea69" alt="" width="388"><figcaption></figcaption></figure>

This dialog also allows you to block translations for a specific language across all conversations of the same bot, rather than just a single conversation.\
